€10 gift card
Claim your exclusive offer before it expires!
Bait fishing for pike and zander
incl. VAT, excl.
| Name | 3.6m DB Series Pike - 2.75lbs |
| EAN | 5056317750454 |
| MPN | Z0900002 |
| Brand | Zebco |
| Rod Length | 3.6m |
| Casting Weight | 220g |
| Number of Sections | 2pc |
| Rod Weight | 355g |
| Material | Carbon |
| Transport length | 186cm |
| Handle | EVA / cork |
| Guide design | Anti-frap |
| Line rating | 10-20 lb |
| Braid rating (series) | 15-65 lb |
| Braid diameter (series) | 0.20-0.40 mm |
| Mono rating (series) | 12-20 lb |
| Mono diameter (series) | 0.30-0.40 mm |
| Test curve | 2.75 lb |
| Guides including tip | 5+1 |
Choose the DB Series Zander for its 5-45g casting weight and 3.0m length. At 260 g it is lighter and shorter than either 3.6m Pike model, which is rated for substantially heavier casting loads.
Both are 3.6m two-piece rods for deadbaiting. The 2.75lb version weighs 355 g with a listed 220 g casting weight, while the 3.25lb version weighs 375 g with a listed 280 g casting weight. Choose between lower rod weight and the higher casting-load rating.
All three rods split into two sections. The Zander needs 157 cm of transport length and either Pike needs 186 cm, so check your storage space against the chosen model.
No questions asked, 30 days to return.
Your data is protected by industry-standard 256-bit SSL/TLS encryption.
The Zebco DB Series deadbait rods use durable carbon construction for pike and zander fishing. Their power reserves support casting large baits and setting treble hooks, while the action retains enough give to reduce hook pulls on a short line.
The DB Series Zander is the shorter, lighter option at 3.0m and 260 g, with a 5-45g casting weight. It is intended for zander and lighter bait setups than the Pike models.
Both DB Series Pike rods are 3.6m long and intended for deadbaiting for pike and zander. The 2.75lb test-curve version weighs 355 g and has a listed casting weight of 220 g. The 3.25lb test-curve version weighs 375 g and has a listed casting weight of 280 g. The higher-rated Pike model accommodates heavier casting loads at the cost of 20 g more rod weight. Its supplier name uses the token 3.25bl, while the technical specification states a 3.25lb test curve.
Every model has a full EVA handle with cork trim. Large anti-frap guides are selected for durability and improved casting. Each model's action and guide layout has been individually developed and tested. The Pike models have five guides plus a tip guide.
The series description specifies braid of 15-65 lb at 0.20-0.40 mm and monofilament of 12-20 lb at 0.30-0.40 mm. Separate model-level line ratings are 8-15 lb for Zander and 10-20 lb for Pike. These are differently scoped supplier ratings, not a single combined line range.
All models separate into two sections. Allow 157 cm of transport space for the Zander and 186 cm for either Pike model.
Carbon fibres conduct electricity. Never use these rods during thunderstorms or near high-voltage power lines because of the risk of fatal electric shock.
