€10 gift card
Claim your exclusive offer before it expires!
Supple leaders for discreet bait presentation
incl. VAT, excl.
| Name | REGENERATOR MONO 30M 0.70MM 26KG CLEAR |
| EAN | 5706301548412 |
| MPN | SVS54841 |
| Brand | Savage Gear |
| Leader Strength | 26kg |
| Leader Length | 3000cm |
| Material | Copolyamide monofilament |
| Leader Material | Monofilament copolymer |
| Quantity | 1pieces |
| Diameter | 0.7 mm |
| Colour | Clear |
| Water type | All Water Types |
It is leader material on a 30 m spool, not a finished rig. It is intended for making predator traces, including spinning leaders, so you can make the leader lengths needed for your setup.
Breaking strengths are 10, 14.5, 20, 26, 33, 41 and 52 kg, while every spool is clear and 30 m long. The stated diameter pairs run from 0.40 mm at 10 kg to 1.05 mm at 52 kg, so choosing higher strength among these pairs means using thicker material.
Both methods are supported. The supplier states high knot strength and confirms that the material is crimpable, so you can choose either connection method for your leader construction. No specific knot pattern or crimp size is supplied.
Its soft, virtually invisible material supports bait and lure presentation, while abrasion and cut resistance address contact with toothy predators. The supplier specifically claims resistance to pike teeth, not an absolute bite-proof guarantee, so select the required breaking strength rather than treating the line as indestructible.
No questions asked, 30 days to return.
Your data is protected by industry-standard 256-bit SSL/TLS encryption.
Savage Gear Regenerator Mono is clear monofilament leader material for predator rigs, including spinning traces. Its soft copolyamide construction supports bait and lure presentation while remaining virtually invisible in the water. It is supplied on a 30 m spool for making your own leaders, rather than as a finished rig.
The material combines high abrasion resistance with resistance to cuts and pike teeth for contact with toothy predators. High knot strength supports tied connections, and the line can also be crimped. Its elasticity absorbs shocks, providing cushioning in the leader.
The copolymer is UV-resistant, chemical-resistant and non-absorbent, and the supplier specifies suitability for all water types.
Every version is clear and contains 30 m. The verified diameter and breaking-strength combinations are 0.40 mm with 10 kg, 0.50 mm with 14.5 kg, 0.60 mm with 20 kg, 0.70 mm with 26 kg, 0.90 mm with 41 kg and 1.05 mm with 52 kg. There is also a 33 kg version.
Choose by the breaking strength required for your rig. Among the specified diameter pairs, higher breaking strength comes with thicker material. The 10 kg version is the thinnest stated option, while the 52 kg version provides the highest stated breaking strength. The intermediate ratings offer steps between these ends of the range without changing spool length or colour.
