€10 gift card
Claim your exclusive offer before it expires!
Distance carp fishing around obstacles
incl. VAT, excl.
| Name | Korda LongChuck Tapered Leaders - 5x10m Vorfachschnur - Durchmesser/Tragkraft:0.30-0.47mm / 12-30lb |
| EAN | 5060660638116 |
| MPN | 77325 |
| Brand | Korda |
| Leader Strength | 5.44-13.61kg |
| Leader Length | 1000cm |
| Quantity | 5pieces |
| Line diameter | 0.3-0.47 mm |
| Taper length | 200 cm |
| Thick section length | 800 cm |
The thin ends are 0.27 mm / 10 lb, 0.30 mm / 12 lb or 0.33 mm / 15 lb. All taper from the same 0.47 mm / 30 lb thick section, so choose by the diameter and strength needed at the mainline connection, not by a difference in the thick end.
Connect the thin end to the main line with a joining knot. Each 10 m leader has a thick 8 m section and tapers over the final 2 m, placing the reduced diameter at the mainline connection while retaining the thick section for casting loads and abrasion.
Yes, the supplier specifically describes use around mussel beds and other obstacles. The thick section and high abrasion resistance support this use alongside powerful distance casts, but no abrasion-proof guarantee is given.
Each spool contains five 10 m leaders in the selected diameter and strength variant. You receive five separate leader lengths rather than one 50 m leader, each with the same 8 m thick section and 2 m taper.
No questions asked, 30 days to return.
Your data is protected by industry-standard 256-bit SSL/TLS encryption.
Korda LongChuck Tapered Leaders are designed for long-distance carp fishing. Each 10 m shock leader has a thick 8 m section to withstand powerful casts and contact with mussel beds and other obstacles. High abrasion resistance supports use around these hazards, while very low stretch limits elongation under load.
The diameter reduces over the final 2 m. Tie this thinner end to the main line with a joining knot, leaving the thicker section to handle casting loads and abrasion.
Choose between 0.27-0.47mm / 10-30lb, 0.30-0.47mm / 12-30lb and 0.33-0.47mm / 15-30lb. The difference is at the thin end: 0.27 mm has the lowest stated breaking strain, 0.30 mm is intermediate and 0.33 mm has the highest. All three share the same 0.47 mm, 30 lb thick end. Compare the thin-end diameter and strength when choosing the connection to your main line, rather than expecting a stronger thick section from the heavier option.
Each spool contains five 10 m shock leaders in the selected variant. The length and taper layout are the same across all three options.
