€10 gift card
Claim your exclusive offer before it expires!
Quick changes between carp rod supports
incl. VAT, excl.
| Name | Black Label QR 12 Power Point Bankstick |
| EAN | 5056212138067 |
| MPN | CBS054 |
| Brand | Fox |
| Tool Type | Bankstick |
| Material | Aluminium |
| Length | 30.48cm |
| Power Source | Manual |
| Adjustable | true |
| Bankstick Type | Power Point, Screw Point, Camlock, Adjustable, Storm Pole |
| Tip Type | Auger Point, Screw Point |
| Diameter | 16 mm |
| Colour | Black |
| Attachment system | Quick Release (QR) |
| Banksticks supplied | 1 pc |
The 6-inch Bankstick measures a nominal 15.24 cm. Power Point versions are 9, 12, 24 and 36 inches, equivalent to 22.86, 30.48, 60.96 and 91.44 cm. Choose the length for your rod-support height. Only the Power Point versions have the auger screw point and stored T-Bar, so choose one of those when you need that installation method.
Yes. The QR collar attaches alarms, rear rests and buzz bars with a twist, allowing changes between single banksticks and two- or three-rod buzz bars. It also aligns alarms and rear rests without spacing washers, so you do not need washers to set their orientation. Other accessories need a corresponding thread and QR connection.
Use the T-Bar to screw the auger point into the ground. It is stored in the end of the inner section, which you must remove before inserting the T-Bar into the outer tube. This keeps the installation tool with the bankstick. Never use a buzz bar to force a QR bankstick into the ground.
Yes, with a matching QR counterpart they can serve as storm poles on a bivvy or brolly. The QR adapter also works with items that have a corresponding thread, such as bivvy storm caps and spod buckets. Check that connection before choosing them for this use, as a matching thread and QR counterpart are required.
No questions asked, 30 days to return.
Your data is protected by industry-standard 256-bit SSL/TLS encryption.
Fox Black Label QR banksticks support bite alarms, rear rests and buzz bars for carp fishing. The Quick Release (QR) system attaches these components with a twist of the knurled collar, so you can switch between single banksticks and two- or three-rod buzz bars. It also lets you align alarms and rear rests without spacing washers, which can loosen or compress over time.
Every version uses 16 mm black anodized aluminium and a compact, restyled Cam Lok adjustment system. The inner section adjusts to position your rod support, while the QR collar handles attachment and alignment.
The 6-inch Bankstick is the shortest version at 15.24 cm. The Power Point versions add an auger screw point and a stored T-Bar for installation, including in firm ground. This family contains the following nominal lengths, converted from Fox's inch sizes:
6-inch Bankstick: 15.24 cm.
9-inch Power Point Bankstick: 22.86 cm.
12-inch Power Point Bankstick: 30.48 cm.
24-inch Power Point Bankstick: 60.96 cm.
36-inch Power Point Bankstick: 91.44 cm.
Choose the nominal length to suit the height of your rod-support setup. The shorter versions suit lower arrangements, while longer versions provide more reach. These are nominal sizes, not stated maximum extension lengths. The auger point and T-Bar apply to the Power Point versions, not the 6-inch model. Each Power Point version is supplied as one bankstick.
The T-Bar is stored in the end of the inner section, keeping the installation tool with the bankstick. Remove the inner section before inserting the T-Bar into the outer tube, then use it to screw the auger point into the ground. Do not force a QR bankstick into the ground using a buzz bar. The auger point passes through Black Label accessories including the stabiliser, pod, Cam Loks and stage stand.
The QR adapter can make items with a corresponding thread quick-release compatible, including bivvy storm caps and spod buckets. With the matching QR counterpart, Power Point banksticks can also serve as storm poles for a bivvy or brolly. Check the matching thread and QR connection for these uses rather than assuming universal compatibility.
