€10 gift card
Claim your exclusive offer before it expires!
Controlled lure fishing at sea
incl. VAT, excl.
| Name | Penn Spinfisher VI 2500 - Spinnrolle Meeresrolle |
| EAN | 0031324038523 |
| MPN | 72117 |
| Brand | Penn |
| Reel Size | 2500 |
| Reel Type | spinning |
| Gear Ratio | 6.2:1 |
| Reel Weight | 305g |
| Max Drag | 6.8kg |
| Retrieve per turn | 84cm |
| Bearing Count | 6 |
| Line Capacity | 235 m / 0.23 mm |
| Corrosion Resistance | IPX5-sealed body and spool design for saltwater use |
| Water Sealing | IPX5 |
| Line Retrieve Rate | 84 cm/turn |
| Body material | Full metal |
| Side plate material | Metal |
| Gear technology | CNC Gear |
| Drag washers | HT-100 carbon |
| Spool line compatibility | Braided line |
| Spool fill indicator | Line-capacity rings |
Its body and spool design are IPX5 sealed, and the HT-100 drag washers sit in a fully sealed spool. These features protect the gearing and drag against saltwater ingress and dirt during marine spinning.
Yes, the spool is designed for braid and has line-capacity rings to help you assess its fill level. The stated capacity is 235 m at 0.23 mm diameter, so use that diameter as the reference rather than assuming the same length for every line.
The 6.2:1 gearing retrieves 84 cm per handle turn. This helps with brisk lure retrieves and taking up slack, giving you a concrete figure to compare with other reels for your setup.
The 2500 offers 6.8 kg of maximum drag through HT-100 carbon washers in a sealed spool. Its full-metal body and metal side plate maintain CNC Gear alignment under load, supporting controlled fights, with a reel weight of 305 g to account for in your setup.
No questions asked, 30 days to return.
Your data is protected by industry-standard 256-bit SSL/TLS encryption.
The Penn Spinfisher VI is a spinning reel for lure fishing at sea. Its IPX5-sealed body and spool design protect the gearing and drag system against saltwater ingress and dirt, addressing the exposure these components face in marine use.
HT-100 carbon drag washers sit inside a fully sealed spool. The 2500 provides 6.8 kg of maximum drag for controlling fish during the fight. A full-metal body and metal side plate keep the CNC Gear system precisely aligned under heavy loads.
The 2500 weighs 305 g and has six ball bearings. Its 6.2:1 gear ratio delivers 84 cm of line retrieve per handle turn, allowing you to pick up slack quickly and retrieve lures briskly. These figures help you compare its weight and retrieve with your intended spinning setup.
The spool is designed for braided line and has line-capacity rings to help you judge the fill level. Stated line capacity is 235 m at 0.23 mm diameter, providing a reference when choosing line diameter and spool length.
