€10 gift card
Claim your exclusive offer before it expires!
Receive carp bite alerts inside the bivvy
incl. VAT, excl.
| Name | RX+ Micron Receiver |
| EAN | 5055350298879 |
| MPN | CEI160 |
| Brand | Fox |
| Tool Type | Bite alarm receiver |
| Power Source | 3 x AA batteries |
| Bite Indicator Type | Wireless electronic receiver with LED indication |
| Compatible alarms | RX+ Micron |
| Maximum paired alarms | 8 |
| Required battery count | 3 |
It registers up to eight RX+ Micron alarm heads using the rear switch. Compatibility is specified for RX+ Micron, so check that your alarms belong to this range. Single RX+ heads and two-, three- and four-rod presentation sets are available separately.
The receiver relays alerts wirelessly and offers adjustable speaker volume, a switchable vibration alert and an optional bite-triggered bivvy light. This gives you several alert options when wind or rain makes the alarms outside hard to hear. Fox specifies Ultra-Long Range™ technology but provides no distance in metres in the supplied information.
Prepare three AA batteries, as they are not included. The switch-on display uses green, orange and red LEDs to show battery condition, with one red LED meaning replacement is needed. Periodic cyan flashing warns of low receiver batteries, while a cyan warning for a particular paired alarm identifies low batteries in that alarm. Do not mix battery ages or types, and note that rechargeable batteries are not recommended.
Yes. Its free-standing design is intended for a bivvy table or bucket lid, and the larger indicator windows are visible from the front and top. You can therefore keep the receiver upright and still see its indications from above. It also has a soft-grip casing and a lanyard attachment point.
No questions asked, 30 days to return.
Your data is protected by industry-standard 256-bit SSL/TLS encryption.
The Fox RX+ Micron Receiver is a wireless receiver for RX+ Micron bite alarms used in carp fishing. It brings bite alerts into the bivvy when wind or rain makes the alarms outside difficult to hear. Digital circuitry, low battery drain and Fox's Ultra-Long Range™ technology support wireless bite indication. The supplied information does not specify a range in metres.
Register up to eight RX+ Micron alarm heads using the switch on the rear. Indicator LEDs with Colour Sync™ link the colour indication to the alarms. Compared with the NTX-R Receiver, the larger LED windows are visible from both the front and top, so the indications can be seen with the receiver standing on a table. RX+ single heads and two-, three- and four-rod presentation sets are available separately.
The on/off and volume control lets you adjust the sound from the cone speaker. A rear switch activates the vibration alert. A separate rear switch enables the optional bivvy light, which lights up when a bite is received. An anti-theft alarm is also included.
The free-standing design lets you place the receiver on a bivvy table or bucket lid. A soft-grip casing helps with handling, and a lanyard attachment point provides a way to attach a carrying cord.
The receiver requires three AA batteries, which are not included. At switch-on, four green LEDs indicate full or nearly full batteries, three green LEDs mean the batteries are used but do not yet need replacing, two orange LEDs show that power is becoming low, and one red LED means replacement is needed. Periodically flashing cyan LEDs warn that the receiver batteries need replacing. If a paired RX+ alarm head has a low battery, the receiver gives a cyan warning for that particular alarm, helping you identify which unit needs attention.
Use the recommended batteries and accessories. Do not mix old and new batteries or different battery types. Rechargeable batteries are not recommended. Keep batteries away from hot places such as radiators, and follow local battery-recycling rules. Do not incinerate or puncture batteries.
Do not trigger the LEDs or speaker close to human or animal eyes or ears. Keep the equipment out of reach of children and infants, and avoid drops or severe impacts. If the device has rubber socket seals, keep them correctly fitted when sockets are unused to maintain water resistance. Failure to follow the supplied safety guidance can damage the equipment or cause safety risks.
