€10 gift card
Claim your exclusive offer before it expires!
Controlled casting with artificial lures
incl. VAT, excl.
| Name | ZENON MG-X-SHS-L ABU ZENON MG X SHS LEFT |
| EAN | 0036282093164 |
| MPN | 1552849 |
| Brand | Abu Garcia |
| Reel Size | LP |
| Brake System | Centrifugal IVCB-4™ casting brake, Carbon Matrix™ drag |
| Spool Material | Aluminum |
| Reel Type | low_profile_baitcast |
| Gear Ratio | 8.3:1 |
| Reel Weight | 145g |
| Max Drag | 6.8kg |
| Retrieve per turn | 83cm |
| Retrieve Hand | Left |
| Bearing Count | 11 |
| Drag Type | Star Drag, Carbon Fiber, Carbon Matrix, Dragclicker |
| Line Capacity | Mono: 125m/0.29mm, 105m/0.32mm, 90m/0.35mm. Braid: 135m/0.29mm, 100m/0.36mm, 70m/0.41mm |
| Frame | One Piece X-Mag™ alloy frame |
| Side plates | C6 carbon |
| Spool design | Infini II™ |
| Handle | Compact bent carbon handle |
| Handle knobs | Flat EVA knobs |
| Main gear | Aircraft grade aluminum |
| Line guide | Ti coated line guide |
| Reel foot | Recessed reel foot |
| Lubrication access | Lube port |
| Water type | Freshwater |
| Anti-reverse | Instant Anti-Reverse |
| Supplied line | Not Pre-Spooled |
| Spare spool | No Spare Spool |
Choose MG-X-L to wind with your left hand or MG-X to wind with your right. Both have a 6.8:1 ratio and recover 68 cm per turn. MG-X-SHS-L also winds left-handed but has an 8.3:1 ratio and 83 cm recovery, so it picks up 15 cm more line per turn when faster recovery matters.
No. IVCB-4™ provides adjustable casting control, while Carbon Matrix™ controls line release during a fight. Every version has star-drag adjustment and a maximum drag of 6.8 kg. Adjust casting control for the cast and the fighting drag for line release, rather than treating one adjustment as a substitute for the other.
All three hold 125 m of 0.29 mm mono and 105 m of 0.32 mm mono. MG-X and MG-X-SHS-L also specify 90 m of 0.35 mm mono and braid capacities of 135 m/0.29 mm, 100 m/0.36 mm and 70 m/0.41 mm. Those two versions are not pre-spooled and have no spare spool, so buy line separately. The supplied MG-X-L evidence does not establish its included line or spare-spool status.
Yes. The supplier describes the compact, lightweight family as designed for finesse lure fishing using the Bait Finesse System, with adjustable IVCB-4™ casting control. No lure-weight range is supplied, so this supports the intended technique but not a particular minimum lure weight. Check weight compatibility before choosing a specific lure setup.
No questions asked, 30 days to return.
Your data is protected by industry-standard 256-bit SSL/TLS encryption.
The Abu Garcia Zenon MG-X is a compact, lightweight low-profile baitcasting reel for lure fishing. The supplier describes the family as suitable for finesse lure fishing (BFS, Bait Finesse System). Its IVCB-4™ casting brake offers a wide adjustment range for controlling the cast, while the one-piece X-Mag™ alloy frame and C6 carbon side plates reduce weight without sacrificing the stated strength and durability.
The MG-X-L has a left-hand handle, a 6.8:1 gear ratio and 68 cm of line recovery per handle turn. The MG-X has the same ratio and recovery, with the handle on the right. Choose between these two by the hand you prefer to use for winding.
The MG-X-SHS-L is left-hand retrieve with an 8.3:1 ratio and 83 cm of line recovery per turn. It retrieves 15 cm more line per turn than the other two models, making it the choice for faster line pickup. The 6.8:1 versions recover less line at the same winding pace. The MG-X-SHS-L weighs 145 g, while the MG-X is listed at 5.1 oz, approximately 145 g.
The IVCB-4™ system controls the cast, while the Carbon Matrix™ drag controls line release during a fight. All three versions have star-drag adjustment and a maximum drag of 6.8 kg. The family description also specifies an audible drag clicker, providing sound feedback when line is taken. The MG-X and MG-X-SHS-L explicitly list centrifugal casting brakes, carbon-fibre drag material and instant anti-reverse.
All three versions hold 125 m of 0.29 mm monofilament and 105 m of 0.32 mm monofilament. The MG-X and MG-X-SHS-L additionally list 90 m at 0.35 mm, plus braid capacities of 135 m at 0.29 mm, 100 m at 0.36 mm and 70 m at 0.41 mm. Compare capacity at your chosen line diameter rather than treating it as a single fixed length.
The Infini II™ spool design is shared across the family. The MG-X and MG-X-SHS-L explicitly specify an aluminium spool, freshwater use, no pre-spooled line and no spare spool. For those two versions, plan to supply your own line rather than expecting a ready-filled or additional spool.
The bearing arrangement comprises 10 stainless steel HPCR™ bearings and one roller bearing. A compact bent carbon handle with flat EVA knobs provides the winding contact points, and the recessed reel foot supports the compact layout. The main gear is aircraft-grade aluminium, and the line guide has a titanium coating.
A lube port provides access for lubrication. It is a useful maintenance provision, but the supplier does not specify a service interval or lubricant in the supplied evidence.
